The CRS-XD xenon lamp weather resistance test chamber

Xenon lamp weather resistance test chamber basic principles:
The weathering test screening in the research and production process formulations to optimize product composition, is also an important element of product quality inspection Applied Materials such as paints, plastics, aluminum panels, as well as automotive safety glass and other product standards are required to do the weathering test.
The main factor is the cause of material aging sunlight, temperature and humidity. Weathering test chamber can simulate the harm caused by the sun, rain and dew. Weathering test chamber with xenon lamp to simulate the effects of sunlight, rain and dew condensed moisture simulation to test the material being tested is placed in a certain temperature cycle of alternating light and moisture program, with a few days or a few weeks time to reproduce harm Outdoor months or even years. Artificial accelerated aging test data can assist in the selection of new materials, transformation of existing materials, as well as how the evaluation formula changes affect the durability of the product.
Xenon lamp weather resistance test chamber main features:
1. Ventilation cooling device: test chamber temperature ventilation cooling system automatically by temperature control.
Rain system: the rain system pumps, time relay nozzle part adjustable spray cycle.
Control blackboard thermometer wireless transmission technology, improve control accuracy.
4 fiber transmission measuring the radiation intensity of the xenon lamp to avoid problems lead to measurement error due to temperature reasons.
Xenon lamp cooling water refrigeration units, water recycling, reduce the costs of operation and maintenance of equipment.
The 6 sample frame sample frame to 1r/min speed rotating around the light source installed in the sample holder blackboard thermometer the BPT or black standard thermometer BST.
Timing device: To record the time of each test, the device has a timer on the operation panel, control equipment time, timing device that automatically shut down.
Protection device: in order to make the xenon arc lamp can work normally, without damage, by the equipment in addition to the xenon arc lamp is lit on the circuit does not work (i.e., cooling water and cooling water chain xenon arc lamp is not lit) and not normal cooling water failures occurred during operation, the xenon lamp automatically turns off, the whole machine stops working protection facilities.
Xenon lamp weather resistance test chamber main technical parameters:
Power: AC 380V/50Hz total power 9KW, effective radiation area: 0.63m2
Xenon lamp power: 6KW (water-cooled type full solar spectrum long arc xenon lamp).
Xenon lamp radiation intensity: (350-850nm) 550W/m2
(Irradiance setting automatic control, optional 340nm, 365nm as the radiation intensity monitoring points)
4 triggers the power 6KW work voltage 220V AC current 27 ± 3A, trigger time <2S, secondary trigger interval> 10min.
5. Temperature range: (room temperature +100 C) ~ 70 ℃
6 Temperature uniformity: ± 2 ℃
7. Specimen basket spin speed: ≥ 1r/min (stepless speed)
8 the exposure / watering cycle 60min/12min, 102min/18min optional
9 studio size: 950 × 950 × 900
10 water pressure 78 ~ 127kpa
11. Filter 255nm below 0%, more than 400 ~ 800nm90%.
Xenon lamp weathering test chamber equipment Material:
Housing: cold plate spray.
Liner the: SUS3042B stainless steel plate.
Seal: silicone rubber seal.
Temperature and humidity control instrument: the South Korean TEMI850 touch screen controller.
Humidification Method: Spray (sample spray).
Convection: the long axis of a dedicated motor.
The stainless steel sample holder, glass observation window, the specimen rack 。